One question that our RCD safety switch testers often get asked is, “Why does my safety switch keep tripping?” You may need to have your RCD switched checked by one of our RCD testers.
If you are unsure about its functionality, you can have your device tested by one of our RCD testers.
What is the purpose of a safety switch?
It is annoying to hear that your RCD keeps tripping. However, this could be an indication of a larger problem. Your safety switch detects potential dangers in electrical currents and protects you from possible electrical shock. Your RCD will turn off the power when it detects any potential danger. It would help if you had an RCD in your home or office to ensure maximum protection. It should be tested frequently to ensure that it is working properly. Jim’s Test & Tag technicians are more than 10 years old in safety testing. Our RCD testing experts are highly skilled and dedicated.
Common Reasons for Frequent RCD Tripping
A faulty electric appliance could be a problem.
There is a possibility that an appliance you’ve had in your home or office for a while may have become unsafe to use. Your RCD problems could be caused by an electrical appliance not working properly. This can be confirmed by unplugging all electrical devices and resetting your RCD. You can plug in all your appliances if the switch is working properly. While doing this, make sure to reset the switch every time you plug in a new appliance. You will be able to tell which device is defective by the RCD if it trips.
The following appliances can cause an RCD trip:
l Washing machines
l Fridges & Freezers
A potential cause could be an electrical circuit in your home.
Your safety switch could be shutting off power to stop flow in a bad circuit. Older wiring can lead to dangerous electrical conditions for occupants in buildings and houses. Old wiring can be prone to faults due to brittle insulation or other damage. Exposed current can be dangerous, so make sure your RCD safety switch switches off the power.
The Residual Current Device may be defective.
While RCDs are built to last, your safety switch may cause frequent trips. You may have a defective device if your RCD trips frequently and cannot be reset, or it trips again after resetting. Regular testing of your RCD should be done according to AS/NZS 3760:2010 . For more information on when your device should be tested, please get in touch with us. You must replace a defective switch to fix it.
How to reset your safety switch
To get your RCD working again, you will need to reset it if it keeps tripping. Find the main toggle switch in your device to reset your RCD. It can be labeled the main switch or the largest at the top of the RCD. This will vary from one device to the next. It is often located in the opposite position of the rest, so the toggle switch can be found if you have difficulty finding it. The switch is off. Resetting your device is as easy as pushing the switch back into the rest position. Jim’s Test and Tag has an RCD tester team that can help you reset your device.
Are you still annoyed by your RCD? This blog post will explain how a safety switch could save your life. They will do their best to protect your life. Jim’s Test & Tag can provide an RCD tester for testing your switch. You can also get a quote online.
RCD Tripping-RCD Flipper Keeps Tripping-Residual Current Disable-Faulty RCD no plugged in, no power reset. The main intermittent Rccb keeps on tripping for various reasons. Switch down.RCD operating current Australia 2022